Fixing Method Of iMac White Screen Issue

| February 28, 2013 | 1 Comment

iMac white screen is a problem from which sometimes you passed out. It is the condition of held the whole programs of your device and it is unable to perform any command and show the white screen. When you face this situation then you become worry about the problematic device and if you doing something important then it increase your tension to lost these applications. Yes, this is really a troubled condition when you are unable to do to fix this problem.

iMac White Screen Problematic

This state of imac is not usually seen but in few situations it can be faced. If you are a victim of white screen on your imac then have patience because here, some tricks are defines to solve your problem.

Restore White Screen of imac:

Imac white screen stuck you from your work and you are not capable to perform any task with the help of your device. When your device show white screen then, it become unable to follow any of your commands. There is a need to restore your imac to perform its functions normally. Some instructions are given in order to use two ways to solve this issue:

PRAM and NVRAM Method:

  1. First you have to shut down the device; you can do this by pressing the turn off button
  2. Once it shut down properly then press the power button again to run the system and keep press the button until you listen to the beep echo
  3. When it done then start process to reset the PRAM and NVRAM
  4. At the same time tap the keys of P-R together
  5. You have to do that until the system will start again and you listen to the set up sound
  6. After that leave the buttons      

SMC Method:

SMC means System Management Controller is a method used to restart the imac with white screen and you have to obey these instructions for that:

  1. Before start the process shut down the device through pressing the power button, as I mentioned in previous method.
  2. Then put away all the attached wires and connections to the imac. You can say that wire free system.
  3. Then give some time to relax it like few minutes
  4. After that attach all cables and connect your system to the other accessories of the device and plug into the power board to give it power supply
  5. Hold the button to start it again then you will see the imac white screen issue resolved and your device will come into its normal state and you can use it freely without having any problem.

Category: Mac

Addison Mel

Author: Addison Mel()

Addison is an instructor of game design and multimedia developer in some technical college; he is also an active member of Microsoft gaming and app precincts. Google+